Raypak Pc Board Temperature Control - Temp Sensor Kit
$475.99
The Raypak PC Board RP2100 is a retrofit kit designed for Raypak Digital Electronic Ignition gas heaters.
More Details
How to get it
Store Pickup
Pickup In Store
The Raypak PC Board RP2100 is a retrofit kit designed for Raypak Digital Electronic Ignition gas heaters.
The Raypak PC Board RP2100 is a retrofit kit designed for Raypak Digital Electronic Ignition gas heaters. Featuring a PB board, temperature control, and a temperature sensor, it is designed to replace the temperature control of the following Raypak models: 85A, 185B, 206A, 207A, 265A, 265B, 266A, 267A, 335A, 335B, 336A, 337A, 405A, 405B, 406A and 407A.
The kit includes everything for installation: one PC board with ignition module, one temperature sensor (with two green wires, one black wire), one plastic PC board shield, one pilot extension wire (Blue with spade connector ends), one rubber protector sleeve for extension wire (orange rubber), one remote control wiring harness (three wires), one bezel clear window gasket, two metal mount brackets, six 1/2" long screws, six 5/8" long screws and six 3/8" OD plastic washers. The board measures 7-5/8" (l) x 4-1/8" (w).
The kit includes everything for installation: one PC board with ignition module, one temperature sensor (with two green wires, one black wire), one plastic PC board shield, one pilot extension wire (Blue with spade connector ends), one rubber protector sleeve for extension wire (orange rubber), one remote control wiring harness (three wires), one bezel clear window gasket, two metal mount brackets, six 1/2" long screws, six 5/8" long screws and six 3/8" OD plastic washers. The board measures 7-5/8" (l) x 4-1/8" (w).
| Product Type: | Pool Part |
| Manufacturer: | Raypak |
See Owner's Manual for details