Raypak - Raypak E3T Electric Pool and Spa Heater, 0011 - 11kW
Click here to schedule an installation
Starting at $101/mo or 0% APR with Affirm. Learn more
- Part Number: 017124
- Model Number: ELS-R-0027-1-T1
- Compact, state-of-the-art pool heater
- Titanium heating element allows for extreme water conditions, including saltwater pools
- Flow sensor technology instead of traditional pressure switch activation
- Easy to install
- 316L stainless steel construction
- Solid State controls to provide quiet operation
- External manual reset button
- More fault code identifiers
- Low temp/freeze protection modes
- Verify compatibility between the pool heater and your existing pool equipment.
- Ensure the surface is level and stable, and has enough ventilation (especially for gas heaters).
- Match and attach the inlet and outlet pipes of your pool pump to the pool heater.
- If it's an electric heater, wire it to the power supply. For a gas heater, connect it to the gas line.
Both installations may require a certified technician or electrician to meet safety regulations and codes. - Please reference additional installation instructions in owner's manual in Guides and Documentation section below.
The Raypak Electric 3-Series Titanium Pool and Spa Heater is the latest technology in pool and spa heating. The E3T is built with titanium heating elements and 316L stainless steel to withstand extreme pool water conditions, including salt water chlorinated pools. The Raypak E3T Pool Heater operates by utilizing the latest solid-state design and flow sensor technology. It has easy to use digital controls with diagnostics and the compact size makes it easy to install for new construction or replacement installations.
Low temp/freeze protection modes
If the inlet temp is lower than 36F (2.2C) with sufficient flow rate, the heater will operate at reduced heating capacity to prevent water from freezing inside the unit and return to normal operation once the inlet temp reaches 40F (4.5C) and meets the minimum flow rate.
If the Inlet temp is less than 32F (0C), the unit will shut down to prevent damage and the control buttons will not function.
| Input Rate: | 34 MBTU/h |
| Thermal Efficiency: | 100% |
| Energy Type: | Electric |
| Voltage: | 240VAC |
| Phase Type: | 1-Phase |
| Max Water Flow: | 60 GPM |
| Manufacturer: | Raypak |
| Product Type: | Pool Heater |