Testing your water with the AccuBlue Home Device is easy. Just follow the below steps:
1. Verify your mobile device has Bluetooth set to "On".
2. Plug your AccuBlue Home device into an electrical outlet using the provided power adapter. The device will power on automatically.
3. Using a clean plastic cup, collect a water sample from 12"–18" below the surface.
4. Fill your test disk with your water sample. For detailed instructions on how to properly fill your test disk, please reference page 11 of your quick start guide or
watch the instructional video.
5. Once the disk is properly filled, lift the top hatch of the AccuBlue Home device to reveal the test chamber. Because light passes through the non-frosted areas of the disk, these must be kept clean. Only handle disks by the edges, avoid touching the top or bottom. Wet disks should never go into the device, dry them with a lint-free cloth before placing them into the chamber. Align the D-shaped hole in the center of the disk over the D-shaped hub in the test chamber. The disk should be placed gently on the hub. There is no need to firmly press the disk down onto the hub. Close the top hatch once the disk is securely in place.
6. Open the Leslie's app on your mobile device and log in to your account. Tap "My Pool" at the bottom of the screen, then tap "Test Water." After that, select your AccuBlue Home device when asked "How do you want to test your water?"
7. Follow the on-screen prompts to run your test and generate your customized treatment plan.
8. For more information, check out these instructional videos,
Using the Leslie's App and
Dos and Don'ts.