Natural Chemistry - Instant Pool Water Conditioner 1 Gallon

Instant Pool Water Conditioner is used for stabilizing chlorine from UV sunlight loss. It begins working to protect chlorine the instant it's added to the pool. Regular cyanuric acid with a pH of 2.8 is very acidic and can take 4 to 7 days to dissolve. This can cause damage to the pool surface or circulation system, depending on the method of application. Instant Pool Water Conditioner is not an acid, but a salt that has a pool friendly pH, so it will not damage pool surfaces or equipment. Shake well before use.

Dosage for Start-Up:

Divide pool volume in gallons by 10,000 to determine the number of gallons of Instant Pool Water Conditioner required.

Dosage for Maintenance:

If CYA level is less than 30 ppm, calculate gallons of Instant Pool Water Conditioner needed using the following formula.

4 ounces added to 10,000 gallons = 1 ppm increase of conditioner/stabilizer level.